File Size: 7.19 Mb
Description
This manual is considered an integral part of the machine it was attached to at the time of purchase.The manufacturer holds all ownership to material and intellectual property of this manual; any disclosure or copying, even partial, of this publication without prior written consent is forbidden.
This manual is designed to provide the knowledge required for the use and maintenance of the Gear head lathe (Art. T999/230V – T999/230V3A – T999/400V T999/400V3A) and to provide the operator assigned to the device with a sense of responsibility and knowledge of its possibilities and limitations.
Operators must be properly trained and prepared, so make sure that this manual is read and consulted by the staff responsible for commissioning, operation and maintenance of the machine. This is to make all operations as safe and effective as possible for those who carry out these tasks. Therefore, it is imperative to strictly comply with the requirements in this manual, a necessary condition for safe and satisfactory operation of the lathe.
Content:-
1. GENERAL INFORMATION
2. GENERAL SAFETY WARNINGS
3. TECHNICAL SPECIFICATIONS
4. DESCRIPTION OF THE MACHINE
5. MACHINE SAFETY DEVICES
6. FORBIDDEN USES AND HAZARDS
7. LIFTING, TRANSPORTATION AND STORAGE IN WAREHOUSE
8. ASSEMBLY AND COMMISSIONING
9. DESCRIPTION OF CONTROLS
10. OPERATION
11. MAINTENANCE
12. REPLACEMENT PARTS
13. DISPOSAL OF PARTS AND MATERIALS
14. TROUBLESHOOTING
15. ELECTRIC CIRCUIT
You May Also Like These E-Books:-
No comments:
Post a Comment